Hardwood Floor Refinishing in the Dunwoody Village Area
Refinishing is the deepest maintenance option for a wood floor. A contractor sands through the existing finish and a thin layer of wood, which removes most surface scratches, gray worn traffic lanes and old stain color. The floor is then stained if you want a color change and sealed with new finish coats.
Because sanding removes wood, every refinish uses up part of the floor's remaining life. Solid hardwood usually has more room for repeat sanding than engineered hardwood, whose sandable layer can be thin. A contractor should check the wear layer, previous sanding history and board condition before recommending a full sand.
Your project in Dunwoody Village area
Near Dunwoody Village, properties close to commercial frontage can have limited parking or delivery space for sanding equipment. Mention parking or loading limits so the contractor can plan staging.
- Primary ZIP is 30338. ZIP 30338 covers far more than the Village area.
- Properties near commercial frontage may have parking or delivery limits that affect equipment staging. Mention them in your request.
- Townhome and condominium associations may restrict work hours or require a contractor certificate of insurance. Ask your association what it needs.
What an estimate may include
- Assessment of finish type, wear layer, previous sanding and board condition
- Sanding through the existing finish to bare wood, including edges
- Filling small gaps or nail holes where appropriate for the floor
- Optional stain, with sample areas before full application
- Sealer and topcoats of the finish system the contractor recommends
- Basic cleanup of sanding debris inside the work area
What is not included
- Staircase treads and risers (routed separately, not part of this service list)
- Replacing damaged boards (see Hardwood Floor Repair)
- Moving heavy furniture, pianos or appliances unless the contractor agrees in writing
- Lead, asbestos or mold testing and abatement
- Floors with too little remaining wear layer to sand safely
What to consider
Sanding is not the same as recoating
A screen and recoat lightly abrades the top finish and adds a new coat. It does not remove stain, deep scratches or gray worn wood. Full refinishing sands to bare wood. Ask which one your estimate describes.
Remaining wear layer
Engineered planks may have a sandable layer that allows one sanding, several, or none. Previous refinishing also reduces what is left. Exposed tongues or nail heads are signs a floor may be near its limit.
Wax and contamination
Paste wax, oil soaps and some polish products can prevent new finish from bonding. Contractors may need extra sanding or a different approach if contamination is found, which can change the estimate.
Stain changes
Wood species, sanding grit and moisture all affect how stain looks. Red oak and white oak take the same stain differently. Ask for samples on your actual floor before committing to a color.
Dust and return to use
Modern dust containment reduces airborne dust but no contractor can honestly promise dust-free work. Light foot traffic, furniture and rugs each have different waiting periods that depend on the specific finish product and conditions. Follow the contractor and the product label.
Factors that affect pricing
- Total square footage and how many separate rooms or closets are included
- Wood species and whether boards are solid or engineered
- Number of existing finish layers and any wax or polish contamination
- Stain versus natural finish, and how many sample colors you want
- Finish system chosen (for example oil-modified, water-based or hardwax oil)
- Repairs, gap filling or board replacement needed before sanding
- Furniture moving, access, parking and occupied-home scheduling
Before the contractor visits
- Clear small items, rugs and anything fragile from the rooms
- Ask in advance who moves furniture and how large items are handled
- Plan where pets and people will stay while sanding and finishing are underway
- Turn off or discuss HVAC use with the contractor during finishing
- Note any product you have used on the floor, especially wax or oil soap
Questions homeowners ask
- Can every hardwood floor be refinished?
- No. Floors with very little remaining wear layer, severe water damage, loose or failing installation, or certain engineered products may not be good candidates. A contractor needs to inspect the floor first.
- Is refinishing dust-free?
- No contractor can honestly promise dust-free sanding. Containment systems reduce dust, but some cleanup should be expected.
- How soon can I walk on the floor?
- It depends on the finish product, number of coats, temperature and humidity. Ask your contractor for the waiting times for the specific product they use, and check the product label.
- Can I change the stain color?
- Usually yes on a full sand, because sanding removes the old color. Results depend on the species and condition of the wood, so ask for samples.
Related services
- Hardwood Floor Repair
Board replacement, patching, gaps and localized damage. Hardwood Floor Repair estimate requests for Dunwoody, GA homes, referred to independent local contractors.
- Hardwood Screen and Recoat
Light abrasion and a fresh finish coat, no sanding to bare wood. Hardwood Screen and Recoat estimate requests for Dunwoody, GA homes, referred to independent local contractors.
- Hardwood Floor Extension and Matching
Continue existing floors into new rooms and blend the finish. Hardwood Floor Extension and Matching estimate requests for Dunwoody, GA homes, referred to independent local contractors.
Explore service areas
- Hardwood Floor Refinishing in the City of Dunwoody
Sand to bare wood, optional stain, new finish coats. Estimate requests for Dunwoody addresses (ZIP 30338, partial), referred to independent contractors.
- Hardwood Floor Refinishing in the Dunwoody Village Area
Sand to bare wood, optional stain, new finish coats. Estimate requests for Dunwoody Village area addresses (ZIP 30338, partial), referred to independent contractors.
- Hardwood Floor Refinishing in Dunwoody North
Sand to bare wood, optional stain, new finish coats. Estimate requests for Dunwoody North addresses (ZIP 30360, partial), referred to independent contractors.
Related hardwood flooring resource
Dunwoody Hardwood Floors Project Inquiry
Dunwoody Hardwood Floors is a referral service. It connects homeowners with independent flooring contractors and does not perform flooring, construction or installation work itself. Contractors set their own prices, schedules and terms.
When you submit a request, the details you provide will be shared with a relevant independent contractor so they can contact you about an estimate. Privacy policy.
Open project inquiry in a new tab